Yangzhou Hengchun Electronics Co., Ltd

High quality product, professional service, being the core supplier in laser industry!

Rotary Multi Turn Modulating ACtuator with Non - Intrusive Knob Switches for Process Control

Rotary Multi Turn Modulating ACtuator with Non - Intrusive Knob Switches for Process Control

Rotary Multi Turn Modulating Actuator With Non - Intrusive Knob Switches for Process Control The electrical housing is equipped with a select knob and a control knob, and the knob shaft is not through the control box lid. The knobs used Hall sensor to control the actuator, so without opening the...

Send Inquiry
Product Details

Rotary Multi Turn Modulating Actuator With Non - Intrusive Knob Switches for Process Control

The electrical housing is equipped with a select knob and a control knob, and the knob shaft is not through the control box lid. The knobs used Hall sensor to control the actuator, so without opening the cover you can achieve non-intrusive parameter setting and local control. The select knob can be locked in the desired control position to prevent manipulation.

The local display module of CKD actuators configured with a unique user-friendly integrated graphics and text display type LCD liquid crystal screen, include the following features:

●Graphic display: Shows the position of the electric actuators.

Control mode: Displays the control mode of the electric actuator.

Information Center: Displays the operating status of electric actuator, the input signal, running torque and detailed alarm information.

LED indication: Red / open, green / close, yellow / stop, orange / infrared receiver.

IrDA infrared receiver: the use of Infrared setting device can set the parameters of the electric actuator.

Selection knob: In the normal control mode, to achieve local / Stop select / remote control mode.

Control knob: In local control mode, to achieve the opening / closing operation of the control function.

CKD electric actuator can accept many kinds of remote input command signal, to realize the remote control of the electric actuators:

2-wire control

3-wire control

4-wire control

external interlock control

ESD emergency control

remote Analogue control

modbus fieldbus

profibus fieldbus

Remote switch control signals can be either a contact of the self-hold signal, can also be a point contact signal.
Switch signal may be an external 18-30VDC or 187-250VAC power supply, but also by CKD electric actuator internal 24VDC power supply, control signals can be non-polar connection, user-friendly field wiring and commissioning.
Current switching control signal input: 5mA @ 24VDC or 5mA @ 220VAC
ON-- contact closure required minimum control voltage: 12V
OFF-- contact separation required maximum control voltage: 6V

Description:
1. Product Name: CKD series Multi-Turn Modulating Actuator
2. Power Supply: Single Phase or Three Phase, Maximum Voltage: 480 Volt, Frequency: 50/60 Hz
3. Material: Aluminum Casting
4. Type: Regulating Type, Field Bus
5. Work Mode: S4-25% duty, 1200 starts/hour
6. Torque: 40N.m to 1000N.m
7. Output speed:8 to 144rpm
8. Motor Insulation Class: F Class, H Class can be customized
9. Protection Grade: IP 68
10. Explosion Proof Protection: Exd II BT4/ CT4(some product can reach Exd II CT 6)
11. Cable Inlet: Explosion Proof- 1 * NPT 1.5",2 NPT 1"
12. Environmental Temperature: -30 ℃-70℃(Standard),Maximum 125 ℃ ,while Minimum -50 ℃
13. Coating: Phosphoric acid pickling,Surface electrostaic spray
14. Joint Type: Flange, comply with ISO 5211
15. Certification: ATEX, CE, etc
16. Application: Mainly for Control Valve to control the flow condition  
Datasheet of Multi-Turn Modulating Actuator(3phase)

No.

CKD

Series

RPM

Power Type

Torque

(N.m)

ISO Flange

1

CKDM 4

24

380V/3PHASE/50HZ

40

F10

2

CKDM 4

48

380V/3PHASE/50HZ

32

F10

3

CKDM 10

24

380V/3PHASE/50HZ

100

F10

4

CKDM 10

48

380V/3PHASE/50HZ

80

F10

5

CKDM 16

24

380V/3PHASE/50HZ

160

F10

6

CKDM 16

48

380V/3PHASE/50HZ

120

F10

7

CKDM 25

24

380V/3PHASE/50HZ

250

F10

8

CKDM 25

48

380V/3PHASE/50HZ

200

F10

9

CKDM 25

96

380V/3PHASE/50HZ

160

F10

10

CKDM 40

24

380V/3PHASE/50HZ

400

F14

11

CKDM 40

48

380V/3PHASE/50HZ

300

F14

12

CKDM 40

96

380V/3PHASE/50HZ

200

F14

13

CKDM 60

24

380V/3PHASE/50HZ

600

F14

14

CKDM 60

48

380V/3PHASE/50HZ

450

F14

15

CKDM 60

96

380V/3PHASE/50HZ

300

F14

16

CKDM 100

24

380V/3PHASE/50HZ

1000

F16

17

CKDM 100

48

380V/3PHASE/50HZ

800

F16

With the aid of wide expertise and experience, Hengchun Electronics researches, develops, manufactures and exports high quality and durable rotary multi turn modulating actuator with non - intrusive knob switches for process control at low price. This special actuators made in China comes in advanced and stable performance, high accuracy, long lifespan, etc. You can rest assured to buy.

Related Products
Inquiry